Jiangsu Liangyou Zhengda Co., Ltd. is specialized in the R&D, development, design, manufacture and sales & service of steel silo equipment and silo system engineering technology. Steel silo can be used in: grain industry, feed industry, oil industry, building materials industry, brewing industry and port industry. FDSP silo specializes in the design, manufacture, installation of helix silo and bolted silo engineering.
Made of high quality hot dip galvanized steel sheet (galvanized specification can be: 275g/㎡, 350g/㎡, 450g/㎡). Adopted automatic corrugated board production line. The diameter of the assembly silo can range from φ2.75m to φ27.5m. The height of the straight tube section can range from 1.12m to 20.16m, and the storage volume can range from 11m3 to 13333m3.
The interior of the silo can be configured with temperature measuring system, ventilation system, material level system and circulation fumigation system according to customer requirements.
Silos can be divided into: corn steel silos, soybean steel silos, wheat steel silos, barley steel silos, sorghum steel silos, soybean meal steel silos, sawdust steel silos, biomass pellet steel silos; At the same time, our company can customize the production of flour steel silos, cement steel silos, building materials steel silos;
According to the form of conical bottom, silos can be divided into: concrete flat bottom steel silos, concrete cone bottom steel silos, steel structure support silos (single silo capacity should be less than 1500T);
24-2500t soybean silo storage project
The process characteristics of this project are as follows:
1. The main materials in the steel silo are: soybean, the silo type is the assembly silo, the diameter is ￠15.5m , 16.8m high in the straight tube section, and the foundation form is the concrete full cone foundation;
(1) The unloading section is double-sided unloading, the unloading grid screen is the truck load-bearing model, and both sides of the unloading pit are equipped with centralized dust removal to improve the working environment;
(2) The cleaning section is equipped with large-output double-drums cleaner and permanent magnet tube, and the cleaning output is 200TPH
(3) temporary storage and drying section: Temporary storage is 4-200t soybean assembly silo, used to buffer the difference between feeding speed and drying speed, so as to achieve the purpose of rapid unloading and even drying;
(4) Buffer storage and silo storage section: the storage section is 6-250t soybean assembly silo, mainly to cool the materials from the drying tower through the storage section. The storage section is 24-2500t soybean assembly silo, and the incoming output is 100TPH. The silo is equipped with temperature measuring and ventilation system, which can effectively control the grain situation.
(5) bulk storage section: equipped with 1-75t soybean assembly silo, bulk trucks can directly pass and load at the bottom;
Features of the engineering process design:
(1) Equipped with two temporary storage silos before and after drying, which is more conducive to the on-site production management of customers;
(2) The bottom of the silo adopts a heavy two-way belt conveyor to save equipment and power, so that one device can realize the grain exchange between silos and grain output.
(3) In the design of silo foundation, the ventilation screen is designed in the form of detachable and easy to replace, so as to keep the air duct unobstructed and the ventilation effect, and effectively control the grain situation in the silo;
(4) The base of the warehouse is designed in the form of concrete full cone, so that the silo exits by materials from the sliding angle, saving equipment and power;
For different projects, different customer requirements, different processes, the following is the specific engineering options:
(1) Cleaning system (this part can be omitted if the raw materials are clean);
(2) Ventilation temperature measuring system (if the raw materials are relatively dry, and the storage time in the silo is less than 7 days in winter and less than 4 days in summer, this part can be saved);
(3) Grain exchange system (if the raw materials are relatively dry, and the storage time in the silo is less than 60 days in winter and less than 30 days in summer, this part can be saved).
(4) Customers can choose screw silo or assembly silo according to their own needs.
We design comprehensive solutions for machinery and engineering according to different requirements of customers, different raw materials and different sites.and provide 3D renderings to enhance the user experience.
We can design project planning solutions according to the different needs of customers, and provide 3D renderings to enhance the user experience.Also, we' ll help customers to accurately sort out their own needs, and work with customers to repeatedly rationalize the scientific process, scientific, and optimize the design of the product system, and meet the reasonable individual needs of customers at any cost.With the spirit of perfectionism, we will build a good friend turnkey project, seek for our customers' value, and use the "differentiated competition strategy" to improve the market competitiveness for our customers and achieve strong cooperation and common development.
We design comprehensive solutions for feed machinery, fertilizer machinery, biomass machinery, storage machinery and engineering according to different requirements of customers, different raw materials and different sites.Our professionals will go deep into the construction site and plan well. In practice, it is truly tailored to local conditions. Different design schemes and construction methods are adopted according to different survey results to ensure scientific, reasonable, economical and practical, and environmentally friendly and then create a safe, efficient and stable production line for customers.
The company has a professional technical team with 25 years of practical experience in design, manufacture and installation. We persist on unified management, unified training, high quality personnel and good service always the same. Strict technical assessment is carried out every year, and the examination and approval is basic qualified for employment. Our workers have rich professional quality and high sense of responsibility for on-site installation and maintenance experience.With a high degree of professionalism, we help our customers achieve production efficiency in the shortest period of time, allowing customers to seize market opportunities and win at the starting line.
Regardless of pre-sales or after-sales technical support, we are always ready to provide customer satisfied service.With the rigorous order to ensure the highest efficiency, we are prepared to receive customer technical inquiries at any time, on-site service, equipment maintenance, production failures, service complaints and other issues to improve customer satisfaction.Through telephone consultation and on-site service, we can find problems and solve problems in time to ensure customer rights, provide professional and targeted services for different users, and escort customers throughout the process
After the installation and commissioning is completed, we will provide one-to-one technical guidance according to the actual situation of the customer, and will be responsible for training the operators until the customer can completely operate the production. We truly be "customer-centric" to provide excellent service to customers.Follow-up questions will be answered by professionals and they make timely feedback records, and provide solutions to problems. If there is a need for on-site guidance, depending on the specific circumstances, the company will arrange relevant professionals to provide timely guidance to the designated location.
In the service quality control, we insist on lifelong service and infinite improvement. In addition to the shelf life, we provide lifelong service to our customers. As long as the equipment is in use, the service of the good friend will not be terminated. In the service, we insist on the first time response, the fastest speed to solve the problem. At the same time, the product dynamic improvement system is established, and the typical problems on the products reflected by the customers are solved. Immediately after the solution, the product design is improved. According to the idea of 'no best, only better', we pursue endless improvement on the product, the service process on the issue. After the solution, we will immediately improve and optimize the service process, service standards and documentation system, and infinitely improve the service system with the spirit of 'accumulating the tide and dripping through the stone'.