Project Description:

1) unloading process is double side loading, the grizzly can carry the truck, two sided of dumping hoper is equipped with de-dusting system to improve the working condition.

2) cleaning process is equipped with double drum cleaner and tubular magnet with large capacity 200TPH

3)storage process: the capacity for inlet is 200TPH, there is temperature measuring and ventilation system inside the silo which could control the grain condition.

4)silo changing process: the capacity of changing is 100TPH,using heavy belt conveyor.

 Features of the engineering process design:

1)in this process, consider the large storage capacity(54000T), quick unloading(the general inlet speed 400TPH), so we use double unloading system so as to loading by two trucks at same time.

(2) When design the silo, the ventilation screen is designed to be detachable and easy to replace, so as to keep the air duct unobstructed and the good ventilation effect, effectively control the grain situation in the silo;

3) the silo changing system is used in the process, the material in the silo could transport to any other silo.

4) double direction heavy belt conveyor is used on the bottom of silo which save the equipment and power, the silo changing and discharging could be made by one equipment.

Other instructions:

For different projects and different customer requirements, the process will be also different, the following could be options during the process design:

(1) cleaning system (this part can be removed if the raw materials are clean);

(2) ventilation and temperature measuring system (if the raw materials are relatively dry, and the storage time in the silo is less than 7 days in winter and less than 4 days in summer, this part can be removed);

(3) the silo changing system (if the storage time in the silo exceeds 60 days in winter and 30 days in summer, the warehouse changing system shall be considered);

(4)As the single silo capacity is large than 5000T, So we suggest to use bolt silo not helix silo.